3.Pour cooking oil into Oil Reservoir until it reaches between the "MIN" and "MAX" marks on the inside of the reservoir. DO NOT OVER OR
UNDER FILL.
4.Make sure that fryer is off and insert plug into 120 volt AC outlet.
5.Turn fryer to desired temperature position. The Power Indicator will illuminate. The Ready Indicator will illuminate when the oil has reached the preset temperature.
6.Using your slotted spoon, place food inside the fryer (Do not over stack food). Close Lid until it snaps into place. Overloading will lower the oil temperature, causing food to absorb too much oil and cook improperly.
7.For cooking times, see chart on page 8, or use the recommended times in your recipe.
8.As your food fries, open lid and stir slowly with slotted spoon or other
9.Once the food reaches desired brownness, using your spoon, lift and drain. Set the drained food on several layers of paper towels to absorb excess oil. Season if desired. To fry more servings, repeat steps 5, 6, 7, 8 and 9.
WARNING: DO NOT USE THE DETACHABLE MAGNETIC CORD SYSTEM TO DISCONNECT THE FRYER. ALWAYS DISCONNECT PLUG FROM
WALL OUTLET FIRST TO DISCONNECT FRYER.
Use only Model
CAUTION: The detachable magnetic cord is only for accidental disconnection and not to be removed during normal operation. If the cord becomes disconnected, the user should immediately unplug the cord set from the wall outlet, then reconnect the magnetic cord to the deep fryer and then to the wall outlet.
6 | www.oster.com |
CARE AND CLEANING
WARNING: ALWAYS TURN CONTROL TO “OFF” THEN DISCONNECT PLUG FROM WALL OUTLET BEFORE DISCONNECTING MAGNETIC CORD.
CAUTION:
•Do not immerse cord sets in water or any liquid.
•Do not attempt to defeat the detachable magnetic cord system by trying to permanently attach cord set to product.
•Do not stick pins or other sharp objects in holes on magnetic cord set.
•Do not use any type of steel wool to clean magnetic contacts.
1.Turn unit OFF.
2.Unplug from outlet and allow unit to cool completely.
3.Remove magnetic cord from the fryer socket.
4.When unit has cooled, empty cooking oil. If you plan to reuse the oil, store fryer with lid closed. (See TIPS FOR OIL USE AND STORAGE on page 10.)
5.When changing the oil, take the opportunity to clean the inside of the fryer. Remove LID, pour out oil and discard properly; wipe the inside with paper towels to absorb excess grease. Wash interior of fryer with hot soapy water. Rinse and dry thoroughly. Do not use scouring pads or abrasive kitchen cleaners.
CAUTION: Never immerse the fryer in water, or wash in running water.
NOTE: A REMOVABLE CONDENSATION TRAY is located on the back of the fryer under the lid. The CONDENSATION TRAY will collect any water that has condensed
on the inside of the LID when the LID is opened after frying. Remember to empty and clean the CONDENSATION TRAY after each use. To remove condensation tray, remove lid and lift out condensation tray. To clean simply rinse with warm water.
TO REMOVE AND REPLACE LID
• To remove lid, depress OPEN LID BUTTON and lift LID to a vertical position. Remove LID by pulling firmly upwards (See Figure 2). Reverse the sequence to secure lid back into position. Be sure to push down firmly on lid from the vertical position to secure back in place.
www.oster.com7
5/24/13 3:50 PM 
