Oster FPSTFP4263-DFL manual Using Your Food Processor, How To Assemble the Large Bowl

HOW TO:

Using Your Food Processor

NOTE: Do not attempt to chop ice in this food processor; it will damage the bowl and dull the Chopping Blade. This unit will not whip cream, beat egg whites, grind coffee beans, spices or other items with high oil content, or slice or shred hard-cooked eggs, marshmallows, or soft cheeses.

Important: For your protection, this unit has an interlock system. The processor will not operate unless the bowl is properly locked onto the base and cover is properly locked onto the bowl. Do not attempt to operate the unit without the bowl cover, bowl and food chute lid correctly in place. Be sure base is on a flat, dry and clean surface before you begin processing.

NOTE: Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED.

How To Assemble the Large Bowl

Align the base and bowl as illustrated in Figure 1. Align the bowl handle with the UNLOCK mark on the base. Turn the bowl counter-clockwise until it clicks onto the base. The bowl handle should now align with the LOCK mark on the base. (The bowl handle will be positioned on the front-right corner of the base.)

NOTE: There is only one position for the bowl to	Figure 1
lock onto the base. The unit will not operate if the
bowl does not lock onto the base.

How to Lock the Cover

Place the cover onto the bowl. Align the
UNLOCK	mark on the cover and the
UNLOCK	mark on the bowl (as illustrated
in Figure 2). Twist the cover counter-clockwise
towards the LOCK		until it clicks onto the
bowl. The LOCK		mark on the cover should
now align with the LOCK mark on the bowl.
NOTE: When the cover is locked into position,			Figure 2
the safety mechanism on the cover and bowl
will align. The unit will not operate if the cover is not locked onto the bowl.

NOTE: BOWL MUST BE LOCKED INTO BASE BEFORE COVER CAN BE LOCKED INTO POSITION.

How to Lock the Food Chute Lid

Figure 3

Food Chute Lid

1The Food Chute lid hinges onto the back of Food Chute. As illustrated in Figure 3.

Figure 4

2Push down the Large Food Pusher into the Food Chute. As illustrated in Figure 4.

Figure 5

3Push down on the tab of Large Food Pusher to latch the Food Chute lid onto the Food Chute. As illustrated in Figure 5.

NOTE: Unit will not operate if the Food Chute lid does not latch onto the Food Chute

How to Open the Food Chute Lid

Figure 6

1Pull Side Release button out. As illustrated in Figure 6.

Figure 7

2Pull up the Large Food Pusher. As illustrated in Figure 7.

Figure 8

3Pull back the food chute lid and Large Food Pusher. As illustrated in Figure 8.

NOTE: Before opening Food Chute lid, turn the unit OFF and unplug the cord.

6 www.oster.com

www.oster.com 7

FPSTFP4263-DFL_13ESM1.indd 6-7

12/13/12 4:09 PM