Oster OSTER 14 CUP FOOD PROCESSOR with 5-CUP WORK BOWL How to Chop Using the Large Work Bowl

How to Chop Using the Large Work Bowl

NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time.

1	Lock the large bowl onto base.	Figure 9
	(See “How to assemble the large bowl”)
2	Grasp the chopping blade by its stem and
	slide it onto the center post
	(Figure 9).
3	Place food into bowl.
4	Lock cover onto bowl.
	(See “How to Lock the cover”)

5Lock the Food Chute Lid.

(See “How to Lock the Food Chute Lid”).

6 Plug the cord into an electric outlet. Use the Food Guide to prepare food for chopping.

7Press the Chop or Shred button for continuous processing or the PULSE button for short processing tasks. When using the PULSE setting, hold the PULSE button for about 2-3 seconds at a time, check results and repeat if desired.

8When finished processing, press the Off button and allow the chopping blade to stop rotating.

9Twist the cover towards the UNLOCK mark to remove lid.

10Hold the Chopping Blade by its stem and remove. Unlock the bowl by turning it clockwise towards the UNLOCK mark, and lift off. Empty the processed food.

NOTE: Chopping Blade is very sharp, use caution when handling.

How to Chop Using the Small Work Bowl

(Do not use slice/shred disc with small work bowl.)

NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time.

1Lock the large bowl onto base.

(See “How to assemble the large bowl”)

2Insert Small work bowl into large work bowl and twist inner bowl until it is seated into the large work bowl.

3Grasp the small chopping blade by its stem and slide it onto the center post.

4Place food into bowl.

5Lock cover onto bowl. (See “How to Lock the cover”)

6Lock the Food Chute Lid. (See “How to Lock the Food Chute Lid”).

7Plug the cord into an electric outlet.

8Press the Chop or Shred button for continuous processing or

the PULSE button for short processing tasks. When using the PULSE setting, hold the PULSE button for about 2-3 seconds at a time, check results and repeat is desired.

9When finished processing, press the Off button and allow the chopping blade to stop rotating.

10 Twist the Lid towards the UNLOCK mark to remove.

11Hold the Chopping Blade by its stem and remove. Lift small work bowl out of the larger work bowl. Empty processed food.

NOTE: When using chopping blade use slower speeds to control size of chopped food. Chopping Blade is very sharp, use caution when handling.

8 www.oster.com www.oster.com 9

FPSTFP4263-DFL_13ESM1.indd 8-9

12/13/12 4:09 PM