Scanner tab | The Scanner tab provides the following options. |
Document Feeder | Feeder Position — select the desired paper source. | |
| • | Normal: select when you are scanning a stack of documents of 25 |
|
| sheets or less. The input elevator is in its highest position. |
| • | 100 Sheets: select when you are scanning a stack of documents |
|
| between 100 and 25 sheets. |
| • | 250 Sheets: select when you are scanning a stack of documents |
|
| between 250 and 100 sheets. |
| • | 500 Sheets: select when you are scanning a stack of documents |
|
| between 500 and 250 sheets. |
Automatically start scanning — if selected, the transport and feeder will automatically start when the scanner is enabled from the host without touching the Scan button.
Lightweight paper — improves output stacking when scanning lightweight paper. When selected, the scanner will increase the gap between documents in order to allow each document to settle in the output tray before the next document leaves the transport. Using this option will decrease overall throughput.
