OWI CRS-101 installation instructions Tv/Dvd, Comp, AC Power Cord

Line In

1.Connect the left and right line level audio outputs of an audio source to the L and R Inputs on the CRS-CASE using a stereo RCA-RCA patch cable with gold ends.

NOTE: Though the CRS has Left and Right Inputs, the Speaker Outputs are mono, so BOTH channels will be output from BOTH speakers.

2.Feed the audio patch cable through the Wire Access in the CRS-CASE Cabinet to allow connection with the door closed.

TV/DVD

1.Connect the left and right line level outputs of a TV/Projector or DVD Player using a stereo male

RCA to stereo male ¼” phone adapter.

NOTE: The TV/DVD Input can be adapted to any line level audio device. Connections may vary by device.

COMP

1.Connect the line level audio output of a Computer (stereo 3.5mm mini jack typical) using a stereo male 3.5mm mini plug to stereo male ¼” phone adapter.

NOTE: The COMP Input can be adapted to any line level audio device. Connections may vary by device.

AC Power Cord

1.Connect to an unswitched 110V AC outlet.

Figure 15. CRS-101 System Signal Path

16