PAC J1850 manual BLU-GM29

VPW	Arbitration	Class 2	J1850
1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0

Class 2 EOD J1850 CRC

1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

BLU-GM29

GM LAN 29bit

Universal Bluetooth

Integration Interface

Class 2	J1850	Class 2
1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0	1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

The BLU-GM29 is a universal Bluetooth integration interface designed to work with multiple aftermarket Bluetooth kits. By utilizing the OnStar commands found in 29bit GM LAN vehicles, the BLU-GM29 allows your phone audio to be heard through the vehicle’s speakers and gives you control of the EGO TALK, Parrot CK3000 & Motorola IHF1000/IHF1700 through the factory steering wheel controls. The BLU-GM29 is designed to be a plug-and-play interface with these kits, however it can be used with any aftermarket Bluetooth kit (hardwire connections required). Please see below for all installation and control instructions.

EGO TALK

Installing the BLU-GM29 with the EGO TALK: Plug the 12-pin connector on the
supplied EGO2SPLIT harness into the 12-pin receptacle on the SPLITGM29 harness.		Connection Diagram
Plug the free ends of the EGO2SPLIT harness into the EGO TALK control box. This
must be done BEFORE the SPLITGM29 harness is connected to the vehicle. Please	To Factory Radio				To Vehicle
note that the BLU-GM29 does not support A2DP streaming audio. If you want to
enable the A2DP streaming audio out of the EGO TALK, the purchase of a seperate
vehicle specific auxiliary input is required.			Harness
Controlling the EGO TALK with the BLU-GM29:
			SPLITGM29	EGO2SPLIT
To turn Bluetooth controls on or off, press and hold the Source button on the steering				Harness
					To EGO TALK
wheel. After one second you will hear either one or two confirmation chimes. You MUST	BLU-GM29
release the button as soon as you hear the chime. If you do not release the button
within one second after the chime is heard the button will revert to it’s factory function of
changing the source. One chime indicates that the Bluetooth controls are on; two chimes	GM LAN 29bit Universal
	Bluetooth Integration Interface
indicates that the Bluetooth controls are off.
When the Bluetooth controls are activated, the driver information center will display “BT
Control ON”. Whenever a call is incoming or active, the steering wheel controls automatically switch to Bluetooth control.

When the Bluetooth controls are de-activated or a call is ended, the driver information		Phone Controls
center will display “BT Control Off”. Once a call is ended the steering wheel controls
automatically switch back to their factory functions.					Press & hold to
	Answer Call/				enable/disable
Volume Control/Level Matching:					Bluetooth controls
	Privacy Mode
This feature is very important for matching the volume level of the EGO kit to the
radio. When you first install the EGO kit with the BLU-GM29 the volume may be	OnStar/Mute		SRCE			Volume Up
very loud and distorted. The volume controls on the steering wheel have two functions
	Press and hold to
while in the “BT Control On” mode. Press and hold the OnStar/Mute button until a beep	switch between
is heard to toggle between the two functions.	volume functions:
	Function 1 - Phone volume					Volume Down
Function 1 (Radio Volume):The default setting for the volume controls on the steering	Function 2 - Radio volume
wheel will adjust the volume of the radio.	End Call			Voicedial

Function 2 (EGO Volume): The volume controls on the steering wheel will adjust the volume of the EGO kit.

By switching between radio volume and EGO kit volume, you can now adjust the volumes and match them to an acceptable level. Once the
volume level of the EGO kit is set you should not have to change it again as all other
volume control can be done though the radio or the phone itself.	A2DP Controls

To Enter Volume Control Mode:

1. Must be in “BT Control On” Mode

2. Press & hold the OnStar/Mute button until a beep is heard. The driver information center will display “BT Volume On”

3. The volume buttons on the steering wheel will now control the EGO volume

4. Repeat #2 to turn off Bluetooth volume controls

A2DP Controls:

If you are also using the A2DP audio output of the EGO kit (seperate auxiliary input required), you can use the steering wheel controls to track up or play/pause. In order to utilize the A2DP controls, the steering wheel controls must be set to “BT Control ON”. Now press the down arrow on the steering wheel to toggle between A2DP or Phone controls.

Press & hold to enable/disable

Bluetooth controls

Play/Pause

OnStar/Mute	SRCE	Volume Up
Press and hold to
switch between
functions:
Function 1 - Phone volume		Volume Down
Function 2 - Radio volume
Toggle between
Phone & A2DP		Track Up
controls

07-07-09	Pacific Accessory Corporation - Santa Ana, CA 92705	Page 1
	techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com