PAC SWI-JACK installation instructions Swi, Skip to Step

Programming the SWI-JACK to Control the Head Unit (cont.)

Example 1: Alpine Radio - If you have a vehicle with only 3 functions and you want to program Volume Up, Volume Down and Source. Do Step 21 twice, the first time for Volume Up, the second time for Volume Down. Do Step 23 three times to skip Mute, Preset Up and Preset Down. Do Step 21 to program Source. After all 3 buttons have been programmed, you will proceed to Step 24.

Example 2: JVC Radio - If you have a vehicle with only 4 function and you want to program Volume Up, Volume Down, Source and Band. Do Step 21 twice for Volume Up and Volume Down. Do Step 23 two times to skip Mute and Preset Up. Do Step 21 to program Source. Do Step 23 three times to skip Seek Up, Seek Down and Select. Do Step 21 once to program Band. After all 4 buttons have been programmed, you will proceed to Step 24.

Step 20.

A. If the current function above is what you need to program, proceed to step 21. B. If the current function above is not needed, proceed to step 23

Step 21.		SWI-	JACK
Within 7 seconds, press and	VOL
hold the button that is to be
learned on the steering wheel.
		SWI-
Step 22.		JACK

Release the button. VOL

Step 23.	SWI-	JACK	SWI	-	JACK
Within 7 seconds,
press and release the
programming/mode
button on the SWI-JACK.

The LED will turn off when the button has been learned.

The LED will turn on back on. Skip to Step

24.

The LED will flash and stay on. This will indicate that the function has been skipped.

Skip to Step 20.

Step 24.

If you need to program more buttons, repeat step 20 for each additional audio function on the steering wheel.

Program remaining buttons

After all buttons are programmed

SWI-JACK

Once programming is completed, wait 7 seconds. The LED will flash three times indi- cating end of program- ming. The Interface will then flash the version number it was pro- grammed for.