5. Lift up the keyboard and disconnect it from the system as shown in Fig. 17

Fig. 17 Disconnecting the keyboard flat cable

Removing the LCD Module

To remove the LCD Module first remove the battery (see Removing the Battery), remove WLAN Card Module (see Removing WLAN Card Module)and remove the Keyboard (see Removing the Keyboard) then perform the following steps:

1. Release LCD cable from base unit.

Fig. 18 Releasing LCD cable

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 15

Page 15
Image 15
Packard Bell A7 manual Removing the LCD Module, Disconnecting the keyboard flat cable