Part Names and Functions Wireless Mouse Operation

Part Names and Functions

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.

1	Before operating the wireless mouse, connect
1	your computer and the projector with a USB
	cable (not supplied). See “Connecting to a	PRESENTATION POINTER
	Computer” on page 18. When the Pointer	button
	function is used, the wireless mouse is not	Move the pointer on the screen
	available.	with this button.
2	When a USB cable is connected to the	R-CLICK button
	When a USB cable is connected to the	Acts as right (click) mouse
	computer and the projector, turn on the	Acts as right (click) mouse
	projector first, then the computer. If you turn	button while the projector and a

	on the computer first, the wireless mouse	computer are connected with a
		USB cable.
	function may not operate correctly.

L-CLICK button

Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

1	Press and hold the MENU and IMAGE buttons for
1	more than five seconds to switch between the codes.
	The code switches sequentially for one pressing the
	IMAGE button. See the list below.
2	To initialize the remote control code, slide the RESET/
2	ON/ALL-OFF switch to “RESET,” and then to “ON.”
	The initial code is set to Code 1.

		Remote Control Code	Number of Times
		Remote Control Code	Pressing IMAGE
			Button
		Code 1	1
		Code 2	2
		Code 3	3
		Code 4	4
		Code 5	5
		Code 6	6
		Code 7	7
		Code 8	8