Eiki LC-XB33N Video Input Input Source Selection Component, RGB Scart 1-pin, Direct Operation

Video Input

Input Source Selection (Component, RGB Scart 1-pin)

Direct Operation Top Control INPUT button

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red

frame pointer to the Input Menu icon.

Use the Point ▲▼ buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.

3	After the Source Select Menu appeared for Computer
	2, move the pointer to Component or RGB(Scart) and

then press the SELECT button.

Remote Control

COMPUTER button

Input Menu Input Menu icon

Component

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer



Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

Note:

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

•When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

0