Eiki LC-XB33N Video Input, Input Source Selection Video, S-video, Direct Operation, Top Control

Video Input

Input Source Selection (Video, S-video)

Direct Operation Top Control

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button INPUT button

wireless

Remote Control

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red

frame pointer to the Input Menu icon.

Use the Point▲▼ buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu.

3	Move the pointer to the desired source and then press
	the SELECT button.
	Auto	When selecting Auto, the projector automatically
		detects incoming video signal, and adjusts itself
		to optimize its performance. The projector selects
		connection in the following order:
		1. S-video
		2. Video
Video		When video input signal is connected to the
		VIDEO jack, select Video.
S-video		When video input signal is connected to the S-
		VIDEO jack, select S-video.

Notes:

•Wired and Wireless are for the Network function. See the owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

•When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

Input Menu

VIDEO

VIDEO button

Input Menu icon

Move the pointer to

Video and press the

SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

39