Eiki LC-XB33N owner manual Installation Connecting to Component Video Equipment, Audio cable

Installation

Connecting to Component Video Equipment

Cables used for connection

•Audio Cables

•Scart-VGA Cable

•Component Cable

•Component-VGA Cable

(Cabels are not supplied with this projector.)

RGB Scart 21-		Component Video Output		Audio Output
	pin Output		(Y, Pb/Cb, Pr/Cr)

Component
cable	External Audio Equipment

Scart-VGA	Component-	Audio cable
cable	VGA cable	(stereo)

Audio Input

COMPUTER IN 2/ COMPONENT

IN / MONITOR OUT

This terminal is switchable. Set up the terminal as Computer2 input or COMPONENT IN or Monitor output. (See Page 50.)

COMPUTER/ COMPONENT

AUDIO IN

AUDIO OUT (stereo)

Audio cable (stereo)

Notes:

•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

•See page 72 for ordering optional cables.

•RGB Scart signal cannot be output from the MONITOR OUT terminal.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

20