Packard Bell A7 specification

3. Disconnect Audio board from main board as shown in Fig. 30

Fig. 30 VGA board

4.This step only applicable to EasyNote A7. Flip over the main board and release two screws on S-Video Board as shown in Fig. 31

Fig. 31 S-video board on Main Board

M2.5x6 Silver

M2x3 Silver

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 22

Image 22

Packard Bell A7 manual Disconnect Audio board from main board as shown in Fig

Contents

Versa S940 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician Notes Hazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Battery Removing the battery Removing the Memory Module Removing the screws retaining the memory module slot cover Removing the Wlan Card Module Wlan Card Module Removing the Hard Disk Drive Removing the Hard disk drive cover Remove four screws that around HDD module Removing the Optical Disk Drive Eject the optical drive Removing the CPU Removing the screws retaining CPU cover Unlocking the CPU Removing the Keyboard Releasing the keyboard cover Unscrew two screws at the bottom as shown in Fig Disconnecting the keyboard flat cable Removing the LCD Module Carefully lift up the LCD Module Removing the LCD Panel Removing the rubber covers & screws on the LCD Module Disconnect all connectors on inverter board as shown in Fig Removing the Top Cover Bottom Cover Carefully lift up the Top Cover Removing the Main Board Main board Disconnect Audio board from main board as shown in Fig Removing the Speaker Assembly Removing the Touch Pad DIP Switch Settings Screws Versa S940/EasyNote A7 Disassembly Manual