Removing the Optical Disk Drive

To remove the ODD, first remove the battery (see Removing the Battery) and Memory Module Cover (see Removing Memory Module) then perform the following steps:

1. Use pin to eject the optical drive via emergency eject hole as shown in Fig. 8

Fig. 8 Eject the optical drive

1. Pull the ODD module out from the base unit as shown in Fig. 9

Fig. 9 Pulling the optical drive out from the base unit

NEC Versa S940/PB EasyNote A7 Disassembly Manual

Page 10

Page 10
Image 10
Packard Bell A7 manual Removing the Optical Disk Drive, Eject the optical drive