Palsonic 3415DVD user manual DVD System Setup, General Setup Process, General Setup Page

DVD System Setup

DVD System Setup

General Setup Process

SETUP	1. Press the SETUP button, the
	General Setup Page, Preference			..General Setup Page..
	Page will be displayed in turn.			TV Display	LB	4: 3:Ps
				Angle Mark	On	4: 3:Lb
	2. Press	or	to select the	OSD Lang	ENG 16: 9
				Spdif Output
	item, then press to enter the			Caption	On
	submenu.			..Preference Page..
PLAY/ENTER
	3. Press	or	to setup, then	TV Type Auto		PAL
				Parental		AUTO
	press PLAY/ENTER to confirm.
				Password		NTSC
				Default

4.Press EXIT key or press SETUP repeatedly to exit the set-up menus.

		General Setup Page
	ASPECT RATIO DESCRIPTION
	When using the DVD with the internal
	TV, select 4:3/LB.
	The following information applies		..General Setup Page..
	only when the DVD output is		TV Display	LB	4: 3:Ps
	connected to an external TV.		Angle Mark	On	4: 3:Lb
SETUP			OSD Lang	ENG 16: 9
		4:3/PS (PS = Pan and Scan)	Spdif Output
			Caption	On
		You may select if you have a normal aspect	Screen Saver Off
		ratio (4:3) TV, although the 4:3/LB
		(letter box) is a more common choice. In PS
		mode, widescreen material will fill the screen, but at the expense of chopping
		off extreme left and right edges of the original film picture. For this feature to
PLAY/ENTER		work, the disc must be specially coded. Such discs are uncommon.
		4:3/LB (LB = Letter Box)
		You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
		material will be shown in pure unaltered form, allowing the entire picture area
		of the original film to be viewed without any side cropping. Black bars will
		appear above and below the picture.
	16:9
		You may select this if you have a widescreen (16:9) TV. Back bars may still
		appear above and below the picture even if using a widescreen TV. This is
		because some film directors prefer to use ultra widescreen aspect ratios e.g.
		2.35:1. This will normally be indicated on the DVD packaging.

26