Palsonic 6850PF owner manual Other Functions, Setting Child Lock, Sleep timer

LOCK STATUS VALID

CHILD LOCK ON

MAX VOLUME 50

NEW PASSWORD * *- -

PASSWORD - - - -

Other Functions

	Number
	buttons
Press and
hold to enter
child lock
mode
To set or	To set or
	change child
change child
	lock mode
lock mode
Sleep timer

1 Setting Child Lock

Before you enter child lock mode, please select the channel you want to set child lock.

1.1Entering Child Lock mode Press and hold DSP button until the screen displays "PASSWORD - - - -" then input the password to enter into Child Lock mode (the default password is 0000). Every press of

the DSP button, the screen displays as follows:

LOCK STATUS CHILD LOCK MAX VOLUME NEW PASSWORD

1.2 Setting Child Lock

Before you set child lock, please set LOCK STATUS to VALID in the LOCK STATUS page by using VOL+/- (the default status is INVALID).

To set CHILD LOCK for current channel, press VOL+/- to set CHILD LOCK to ON in the CHILD LOCK page. If you want to set child lock for other channels, please select the channel and repeat the above steps to set CHILD LOCK separately. With the CHILD LOCK ON (of OFF) on the screen, press DSP again to display MAX VOLUME. This enables you to preset a maximum volume value when the LOCK STATUS is set to VALID.

If you want to change password, press 0-9buttons to input a new password in the NEW PASSWORD page.

If a locked channel is selected, a red mark appears on the black screen.

When the LOCK STATUS is set to VALID, the PRESET menu page is inaccessible.

The TV set provides a master password: 8288

2 Sleep timer

Press SLP button to select sleep
time from 15 to 120 minutes. The TV
set goes to STANDBY at the
designated time. If you want to cancel
Sleep timer, press the SLP button	90
repeatedly to display --.

21