Palsonic PDP4275 Preparations

Preparations

Use the remote control by pointing' it towards the remote sensor window of

the set. Objects between the remote control and sensor window may prevent

proper operation.

Note:

This illustration is for reference only. The remote sensor may be in

different locations on different models.

Do not expose the remote control to shock. In addition, do not expose the

remote control to liquids, and do not place in an area with high humidity.

Do not install or place the remote control under direct sunlight. The heat may

cause deformation of the unit.

The remote control may not work properly if the remote sensor window of

the main unit is under direct sunlight or strong lighting. In such a case,

change the angle of the lighting or PDP TV set, or operate the remote control

closer to the remote sensor window.

If the remote control fails to operate the PDP TV functions, replace the batteries in the remote control.

Open the battery cover.

Insert two size-AAA batteries.

Install two "AAA" batteries matching the +/-

polarities of the battery to the +1- marks inside

the battery compartment.

Replace the battery cover.

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the

instructions below.

Place batteries with their terminals corresponding to the (+) and (-) indications.

Different types of batteries have different characteristics.

Do not mix batteries of different types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new

batteries and/or cause old batteries to leak chemicals.

Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can

cause a rash. If chemical leakage is found, wipe with a cloth.

The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

If the remote control is not used for an extended period of time, remove the batteries from the

remote control.