System Connections
Connecting to PC
The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect.
1.Connect one end of the VGA cable to the VGA input jack on the side panel and the other end to the PC.
2.Connect one end of the audio cables to the PC audio input jack on the side panel and the other end to the PC audio output jack.
3.Set the PC's resolution at 1024x768@60Hz.
After connection, turn on the unit and the PC and then press the SOURCE button to shift to VGA mode.
Connecting to Earphones
This unit can be connected to an earphone for listening music privately. See the below figure for details:
After connecting to the earphone, the internal speakers output will turn off automatically.
Note: Excessively loud volume could damage your hearing. So turn down the volume before you connect the headphones, and then raise the volume to comfortable level.
13
