System Connections
Connecting to TV Antenna
This unit can be connected to the TV signal input source via the TV jack on the side panel.
After connection, turn on the power of the unit. Then press the SOURCE button to shift to TV mode.
After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels:
1.For 0~9 channel:
Press the number buttons to select the channel X, wait several seconds and it will go to the selected channel.
Or press the number buttons to select channel X, and press the ENTER button to go to the selected channel immediately.
Or press the number buttons to select channel 0X, and it will go to the selected channel immediately.
2. For 10~99 channel:
Press the number buttons to select channel XX, and it will go to the selected channel immediately.
* X is the channel number.
14
