Antenna Connection, Power Connection | Palsonic TFTV680S specification

Preparations (continued)

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.

75-ohm coaxial cable (round cable)

Note:

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.

The aerial cable should not be bundled with the power cord and the like.

Power Connection

Household

AC-INPUT

Plug into AC outlet

power outlet

Bottom view

AC cord

1.Connecting the female plug to the AC socket on the unit.

2.Connecting the male plug to the wall outlet as illustrated.

Note:

This product should be operated only from the type of power source indicated on the marking label.

Always unplug the AC cord from power outlet when not using for a long period of time. This illustration is for reference only. The AC plug may be different on different models.

4

Image 7

Palsonic TFTV680S owner manual Antenna Connection, Power Connection

Contents

N111 Table of Contents Table of Contents Important Safety Precautions Important Safety Precautions Preparations Using the Remote ControlBatteries for the Remote Control Precautions on battery use Antenna Connection Power Connection VOL+ PowerIdentification of Controls Main Unit Hdtv inputs Y, Pb/Cb, Pr/Cr, Audio L/MONO, R Antenna inputAV2 Inputs AV Outputs Sub input / Audio DVI input / Audio Menu Remote Control PIP-POS Identifications of Controls Connections DVD player Connect a DVD PlayerTo play DVD To Watch the PC screen Connect a DTV receiverTo Watch DTV Connect a PC To play VCR Connect a VCR for Recording Turning the Unit On and Off Turning the Unit On and OffViewing the Menus and Displays Storing Channels in Memory Automatically Manual Fine TuningViewing TV Programs Select a Region Skipping Channel Manual SearchEditing Channels Editing Program Name Setting Favourite Channel Locking TV Channels Setting Locking Function On or OffChanging Password Restart the unit to active your setting Changing Channels Adjusting the VolumeSelect input source signal Basic Operation Reducing Picture Noise Setting PictureUsing the Preset Picture Mode Customising the Picture Adjusting Equalizer Setting SoundAdjusting the Sound Balance Adjusting the Headphone Volume IGR German stereo system Broadcasts Setting SRS effectStereo/Bilingual Selection Nicam Broadcast Selection Changing Screen Aspect Ratio Setting SystemSetting Colour System Setting Sound System System Setting POP Picture-out-Picture Changing Screen LayoutSelecting Screen Layout Press CH to select Off, POP, 6 Windows or 9 Windows PIP Operations Using the PIP-POS buttonUsing the Active-WIN button Swap the Contents of the PIP Image and Main Image Changing the Position of Image Adjustment in D-Sub/DVI ModeAdjusting Image Horizontal Size Adjusting the Screen Automatically To select H Position or V Position item Loading Default ValuesAdvanced Adjustment for Image Position Smoothing the Picture Colour RED/GREEN/YELLOW/BLUE TeletextCH or CH VOL+ or VOL Symptoms Check item Troubleshooting TFT-LCD Specifications Supported Display Format Accessories TEL 02 9313