Palsonic TFTV681U owner manual Connections, Connect a VCR, How to connect, To play VCR

Connections

Cautions before connecting

Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model.

Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.

Refer to the operating manual of the external device as well.

When connecting an external device, turn the power off on the panel to avoid any issues.

Connect a VCR

ANTENNA INPUT

AV1 INPUT/

S-VIDEO IN

AV2 INPUTS

AV OUT

HEADPHONE

S-video

cable or

Video cable

Audio cable

	VCR
Yellow (VIDEO)	Rear of the VCR
White (AUDIO L/MONO)
Red (AUDIO R)

How to connect:

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

Note:

For better video, you can use the S-Videoterminal if your source supports it. The unit chooses the S-Video signal prior to the Video signal.

The Video input terminal on the AV IN(2) and the S-Videoinput terminal share the same Audio input terminals.

To play VCR

1.Turn on your LCD TV, press Source button on the remote control.

2.Press Source button repeatedly to select AV2/SV. Note that the period of two-press should be within 2 seconds.

3.Turn on your VCR, insert a video tape and press the Play button.

10