Palsonic TVP-342 owner manual Automatic Timer Recording, Select Timer Programming

PROGRAM NUMBER 4

DATE EVERY SAT

START TIME - -:- -

END TIME - - :- -

CHANNEL - -

TAPE SPEED - -

START TIME - -:- -

END TIME - - :- -

CHANNEL - -

TAPE SPEED - -

DATE EVERY DAY

PROGRAM NUMBER

Be sure the clock is set to the correct time and date before setting the timer.

Power must be turn on to set automatic timer recording.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

DATE:

SETTING TIME: CHANNEL: TAPE SPEED: PROGRAM NO.:

-MENU-

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER SET UP

TIMER

AUTOMATIC TIMER

RECORDING

You may set the TV/VCR to record while you are away. You can set 8 programs to record on a specific day, daily or weekly within a 1 year period.

In the example below, the timer is being set to record: MAY 6th 1996

from 19:30 to 20:50 CH36

LP 4

NOTE: You must use the remote control for this procedure.

.Make sure . . .

.

.

1 Select "TIMER PROGRAMMING"

Press MENU button to point to

"TIMER PROGRAMMING".

.And press SEL. button. When you did not set the clock, "SETTING CLOCK" appears. If so, follow page 11

to set the clock and repeat from step [3].

2 Select your desired program number (1~8)

.The program number which is not set up flashes When Timer Recording has

already been filled, "PROG.	PROGRAM	1 2 3	4 5 6 7 8
12345678" appears. If so,
press MENU button to return
the TV mode.
Press C/P or button	PROGRAM NUMBER		4
repeatedly until your desired
	DATE - -/- -	- - -
program number is appeared.	START TIME	- -:- -
(Example: 4)	END TIME	- - :- -
	CHANNEL	- -
And press SEL. button.	TAPE SPEED	- -

3 Select once, every day or weekly recording

Avoid over lap of programs...

There is a case that a program will not be performed.

.when programs overlap;

The program that the start time is set earlier has

. priority.

When the earliest program has finished and the

For once recording: Press C/P (up) button repeatedly until your desired date is appeared. (Example: "05/06" for May 6th) and press SEL. button.

PROGRAM NUMBER 4

DATE 05/06	MON
START TIME	- -:- -
END TIME	- - :- -
CHANNEL	- -
TAPE SPEED	- -

programs which should start still overlap, the

. recording will start in order of the program number. If you programmed as the illustration, the timer recording would be carried out as follows (shaded part is the carried period):

9:00AM - 10:00AM	for PROGRAM 2
10:00AM	for PROGRAM 1

Program 1

Program 2

Program 3

9:00AM 10:00AM 11:00AM

For every day recording: To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday)

Press C/P (down) button4 repeatedly until "EVERY

DAY" is appeared. And press SEL. button.

For weekly recording: To record a TV program at same time on the same channel every week. (Example: every Monday on channel 7 at 17:00) Press C/P (down) button

repeatedly until "EVERY" and your desired day of the week is appeared together. And press SEL. button.

19