TO CHECK THE START/END TIME
1)Press FUNCTION button so that the REC indicator goes off.
2)Press MENU button to point to "TIMER PROGRAMMING".
3)Press SEL. button.
4)Select a program number you want to check using C/P 
or 
button. The details of selected program appears on the TV screen.
5)Press MENU button. The TV screen returns to the TV mode.
.HINTS:Make sure the channel you want to record is properly
. set in advance.
It is not necessary to press REC button for timer
. recording.Recording begins automatically at the set of the Start
. time.If you are recording using a Timer mode, you may
. not operate the unit manually.
The
. place (or you must put tape over the hole).
If the erasure protection tab is removed, the cassette will be ejected when the FUNCTION button is
. pressed to off.
If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected.
AUTO RETURN
With this feature, after finished timer recording, the beginning of the recorded program(s) can be searched automatically.
1 Select "USER’S SET UP" | ||
Press MENU button repeatedly | TIMER PROGRAMMING | |
PICTURE CONTROL | ||
| ||
to point to "USER’S SET UP". | SETTING CLOCK | |
CHANNEL SET UP | ||
| ||
| USER SET UP |
2 Set "AUTO RETURN" to [ON]
Press MENU button repeatedly to point to "AUTO RETURN".
Press C/P or button | RENTAL | [OFF] |
| GAME MODE | [OFF] |
repeatedly until [ON] is appeared. | REPEAT PLAY | [OFF] |
AUTO RETURN | [ON] | |
Press MENU button. |
|
|
3 Auto Return will begin
When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).
.NOTES:
If you press FUNCTION button during rewinding a
. tape, the Auto Return will be stopped.
The Counter Memory function does not be done in this mode.
4 Watch the recorded program
Press PLAY button.
SLEEP TIMER
The Sleep Timer function make the TV/VCR turn off without using the FUNCTION button after a desired time period.
Press SLEEP button on the remote control repeatedly until your desired sleep time is appeared.
It is set by 30 minutes at a time up to 120 minutes.
| DISPLAY | SLEEP TIME |
1 push | 0 MIN. | 0 minute |
2 pushes | 30 MIN. | 30 minutes |
3 pushes | 60 MIN. | 60 minutes |
|
|
|
4 pushes | 90 MIN. | 90 minutes |
5 pushes | 120 MIN. | 120 minutes |
|
|
|
6 pushes | 0 MIN. | 0 minute |
|
|
|
TO CANCEL THE SLEEP TIMER
Press SLEEP button repeatedly until "SLEEP 0 MIN." is appeared.
21
