![](/images/new-backgrounds/1034574/3457429x1.webp)
If you then want to set the alarm again, press STANDBY. While STANDBY flashes, press ENTER.
USING THE SLEEP
TIMER
The sleep timer sets the receiver to turn off after a length of time you set, so you can fall asleep as you listen to the receiver.
1.When the receiver is off, press SLEEP. The receiver turns on, and appears on the display.
2.Repeatedly press SLEEP until the desired amount of sleep time (15, 30, 60, or 90 minutes) appears on the display.
3.Tune to the desired station.
After the amount of time you set in Step 2, the receiver turns itself off. To turn off the receiver sooner, press RA-
DIO POWER.
MAKING A RECORDING
LOADING A CASSETTE TAPE
1.Press STOP/EJECT to open the cassette compartment’s door.
2.Use your finger or a pencil to turn the cassette’s hub and take up any slack.
Note: Avoid touching the tape. Finger- prints attract dust and dirt that can af- fect sound quality.
3.Insert the cassette into the com- partment with the open side up, full reel to the right, and the desired tape side facing you.
4. Close the compartment’s door.
15