Radio Shack DX-392 owner manual Adjusting Antenna, Memory Tuning

Memory Tuning

For easy selection, you can store the frequencies of your favorite stations in memory. You can store up to 18 SW and 18 FM frequencies, and up to 9 frequencies in each of the other bands.

Follow these steps to store a frequen- cy into memory.

1.Use direct-access or manual tun- ing to tune to the frequency you want to store.

2.Press M.

3.While M flashes, enter a memory location code using the numeric keypad. For SW and FM bands, select from 1–9 and 01–09. For other bands, select from 1–9. The frequency is stored, M stops flash- ing, and the display shows the memory location code

Note: If you wait more than 15 sec- onds to press a memory location code number, M stops flashing and you must begin again at Step 2.

To select a stored frequency, press FM, MW, LW, or SW to select the band. Then enter the memory location code.

ADJUSTING THE

ANTENNA

For the best reception, adjust the tele- scoping antenna for the band you want to listen to.

FM — Fully extend the antenna and rotate it for the best reception.

LW and MW (AM) — Rotate the re- ceiver. The receiver uses the internal antenna for the LW and MW (AM) bands.

12