Panamax MAX 5100-PM manual Looking For Crystal Clear Picture And Sound?, Clean Power Level

LOOKING FOR CRYSTAL CLEAR PICTURE AND SOUND?

MAX® 5100-PM

•Clean Power Level 3

Improves picture and sound quality by elimi- nating noise across the entire AC bandwidth. 60% more efficient at eliminating noise than single stage linear filtration (Level 2).

•3 Isolated Outlet Banks

Isolating outlet banks from one another prevents noise contamination between components.

•High Current Outlets

2 outlets for equipment with high power demands (Amps/Subwoofers).

•USB Charger

Convenience charger for mp3 players, cell phones, and other small electronics.

•Gaming LAN Port

Easy access to LAN port on front panel. Perfect for online gaming.

•Digital Volt Meter

Monitor the voltage supplying your home theater equipment.

•12 Volt Trigger

Allows source equipment to activate or deactivate the outlets on the M5100-PM.

•Power Sequencing

Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.

•11 Outlets

5 Always On, 4 Switched, 2 Switched High Current.

•AVM (Automatic Voltage Monitoring) Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.

MAX® 5100-PM

HOME THEATER POWER MANAGEMENT

Improves Picture and Sound Quality Level 3 Power Cleaning and Linear Filtration

eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability..

Monitors Incoming Line Voltage and Provides a

Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5100-PM is designed to provide noise isolation between 3 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

www.panamax.com