Chapter 6: Using the TV’s features
Using the PC settings feature
You can view an image from a PC on the TV screen. The PC must be connected to the TV’s PC IN terminals.
(- page 16).
You can use a PC Settings feature to adjust the picture’s horizontal position/width, vertical position/height, clock phase, and sampling clock.
Note: If a PC is not connected, this feature will be grayed out in the Set Up menu.
To adjust the PC settings:
1 Repeatedly press +to select PC input mode
(- “Selecting the video input source to view” on page 30).
2 | Press Yand open the Set Up menu. | ||
3 | Highlight PC Settings and press T. | ||
|
|
|
|
|
|
|
|
|
| Set Up | 2/2 |
|
|
|
|
|
| AV Connection | ENTER |
|
|
|
|
|
| PC Settings | ENTER |
MENU Back EXIT Exit
4 Press B or b to highlight the item you want to adjust.
5
PC Settings | 1/2 | |
|
|
|
Horizontal Position |
| 0 |
Horizontal Width | 0 | |
Vertical Position | 0 | |
|
|
|
Vertical Height |
| 0 |
|
|
|
Clock Phase | 0 | |
Sampling Clock | 0 | |
|
|
|
MENU Back EXIT Exit |
| |
•Horizontal Position:
Moves the picture left/right.
The adjustment range is within ±5 from center.*
•Horizontal Width:
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
•Vertical Position:
Moves the picture up/down.
The adjustment range is within ±5 from center.*
•Vertical Height:
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
•Clock Phase:
Helps to reduce noise and sharpen the picture. The adjustment range is within ±15 from center.*
•Sampling Clock:
Helps to minimize periodic vertical stripes on the screen. The adjustment range is within ±15 from center.*
•Reset:
To reset the PC setting, select Reset and press T.
*The range of adjustment may vary slightly.
Setting the PC Audio
This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI (DVI) connection (- page 15).
To set the PC Audio:
1 | Press Yand open the Set Up menu. | |||
2 | Highlight AV Connection and press T. | |||
3 | Press B or b to select PC/HDMI1 Audio, and then press | |||
| C or c to select PC or HDMI1. |
|
| |
| AV Connection |
|
| |
| PC/HDMI1 Audio |
|
|
|
|
| PC |
| |
|
|
| ||
| HDMI1 Audio |
| Digital |
|
MENU Back EXIT Exit
PC: Mutes the sound from the HDMI device, and outputs the sound from the PC
HDMI1: Mutes the sound from your PC, and outputs the sound from the HDMI device
Note:
•The PC/HDMI1 Audio switch setting influences the HDMI1 Audio setting. If it is set to HDMI1, the HDMI1 Audio setting changes to Auto. If it is set to PC, the HDMI1 Audio setting is set to Digital and will be grayed out.
•The PC IN and HDMI1 IN terminals share the audio inputs labeled PC/HDMI1 (AUDIO) on the TV back panel.
•If you have both a PC and an HDMI device connected to the TV, use the PC Audio setting to specify which audio (PC or HDMI) will be output from the TV’s speakers. Also see pages 15 and 16.
42
