Panasonic 470 Interface tab for graphing ports

Graphing port statistics 57
The graphPort dialog box for a single port or for multiple ports opens with
the Interface tab displayed.
Note: Some statistics are available only when you grapha single por t.
Interface tab for graphing ports
The Interface tab shows interface parameters forgraphing a port or por ts.
To open the Interfacetab for graphing:
Step Action
1Select the port or ports you want to graph.
Toselect multiple ports, [Ctrl] + left-click the ports that you want to
configure. A yellow outline appears around the selected ports.
2Do one of the following:
•From the Device Manager main menu, choose Graph > Port.
•From the shortcut menu, choose Graph.
•On the toolbar, click Graph.
The Port dialog box for a single port or for multiple ports ( Figure 18
"Interface tab for graphing ports" (page 57)) opens with the Interface
tab displayed.
Figure 18
Interface tab for graphing ports
—End—
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.