General Use
113
5.1.2 System Name
System Name identifies the system:
On the welcome page.
During an MCU conference call.
When using the Web-interface.
When the codec is acting as an SNMP Agent.
Towards a DHCP server.
H323 ID. Other systems can call in using this name instead of IP-number/IP-address.
System Name is blank by default. System name can be alphanumeric and up to 50 characters
long. Follow the installation procedure to enter a System Name.
Note that if the system name contains Asian and non-Latin character text input, the
International Name using Latin characters only, must be specified as well.