TANDBERG Edge 75/85/95 MXP
294
G G.711: Audio algorithm for normal quality audio (telephone quality, 3.1 kHz) The system will
always have G.711 enabled.
G.722: Audio algorithm for high quality audio (7 kHz).
G.722.1: Audio algorithm for compressed high quality audio (7 kHz)
G.728: Audio algorithm for compressed normal quality audio (telephone quality, 3.1 kHz)
Gateway: The gateway enables sites on IP and sites on ISDN to participate in meetings with
each other.
Global Phone Book: A phone book provided by TMS.
H H.261: Video algorithm for legacy video compression and decompression. The system will always
transmit H.261
H.263: Video algorithm for normal video compression and decompression
H.264: Video algorithm for bandwidth-efficient video compression and decompression
Hardware serial number: A unique number (listed in the System Information menu) to identify
your system towards your TANDBERG representatives.
Humfilter: A highpass filter which reduces very low frequency noise.
I iCIF: Interlaced CIF, 352x288 pixels, 50 fields per second
Incoming call: Someone calls in to your system
Incoming MCU Calls: If occupied in a call, the system will provide a visual/audio indication of an
incoming call and ask to accept or reject the call.
IP address: Defines the network address of the system. This address is only used in static mode.
IP assignment: IP-address, IP-subnet mask and Gateway are assigned by the DHCP server.
IP assignment Static: The system's IP-address and IP-subnet mask must be specified in the IP-
address field.
IP Precedence: Used to define which priority the system should have in the network. Higher
numbers indicate higher priority.
IP subnet mask: Defines the type of network. This address is only used in static mode.
IP TOS: IP Type Of Service. Helps a router select a router path when multiple paths are
available.
iSIF: Interlaced SIF, 352x240 pixels, 60 fields per second
L Layout: Use the Layout key to change picture layout on the screen.