Panasonic A66HY TA SEEK, TA Alarm, PI SOUND, PI Mute, Retune L , Retune S, Mask PI, Mask ALL

PROGRAMMABLE OPTIONALS

To use this function keep press long SEL Button for few seconds, each time you press this button the mode will move and the functions will shown on the display, turn the encoder volume knob up/ down to set the desires functions ,the function states as following:

-TA SEEK, TA ALARM

To determine what action will the radio take if the newly tuned station does not receive TP information for 5 seconds.

TA SEEK

The radio retunes to a different station which contains TP information.

TA ALARM

The radio does not retune but beeps will come out.

-PI SOUND, PI MUTE

When the vehicle is crossing the area where two stations with same AF but different PI code can be received at the same time, the receiver will become unstable, under this situation two modes can be selected.

PI SOUND

The different PI sounds will be heard.

PI MUTE

Under the same situation, the radio will be muted.

-RETUNE L , RETUNE S

To determine the initial time of automatic TA Search or PI Search.

RETUNE L 90 seconds

RETUNE S 30 seconds

- MASK PI, MASK ALL

“PI” is referred to “Different PI with same AF”.

During AF search, PI stations and non-RDS stations with strong signal will be masked, in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the misjudgment of the radio under interference.

There are two options to handle this situation.

MASK PI to mask only the AF with different PI.

MASK ALL mask both PI and strong signal non-RDS stations.

- BEEPS 2ND, BEEP ALL, BEEP OFF

To determine how the beep sound is generated when the keys are pressed.

BEEP 2ND Beeps only when the second function of the dual function button is selected (long press).

BEEP ALL Beeps when any buttons is pressed.

BEEP OFF To disable the beep option.

E - 9