Programmable Settings
Time and Day Handset
We recommend you set the time and day so that the unit will announce the day and time each message was recorded when you play back messages.
1Press [VOICE ENHANCER].
• The indicator flashes.
2Press [0].
Preparation
•“Set time” is announced. If previously set, the day and time will be announced.
3Enter 4 digits for the time (hour and minute). (Ex. To set 9:30, enter “0930”.)
4Set the AM or PM by pressing [*].
•Each time you press [*], “AM” or “PM” will be announced.
5Set the day by pressing [#].
•Each time you press [#], the selected day will be announced.
6Press [VOICE ENHANCER].
•The unit announces the day and time, the clock is set and “E” disappears from the base unit display.
•The handset beeps and the indicator light goes out.
•If the handset beeps 3 times, the time was not set correctly. Start again from step 1.
[OFF]
[VOICE ENHANCER]
and Indicator
•When entering the time in step 3, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, then select PM in step 4.)
The time and day may be incorrect after a power failure. When “E” flashes on the display, set the time and day again.
To confirm the time and day, press [VOICE ENHANCER] then [0].
• The current day and time are announced. When finished, press [OFF].
For assistance, please call:
13