Troubleshooting
Telephone System
Problem | Cause & Remedy |
An alarm tone sounds when you press [C],
•You are too far from the base unit. Walk closer to the base unit and try again.
•Confirm the AC adaptor is plugged in.
•Raise the base unit antenna.
•If the above remedies do not solve the problem, the handset may have lost communication with the base unit. Register the handset again (p. 23)
Static, sound cuts in/out, fades. Interference from other electrical units.
•Move the handset and the base unit away from other electrical appliances (p. 3).
•Walk closer to the base unit.
•Raise the base unit antenna.
The handset does not ring. | • The ringer volume is turned off. Set to |
| high, medium, or low (p. 14). |
|
|
You cannot program any | • Programming is not possible while the |
functions. | handset is being used. |
| • Do not pause for over 60 seconds while |
| programming. |
| • Walk closer to the base unit. |
| • While another user is listening to |
| messages or the Answering System is |
| handling a call, you cannot program. Try |
| again later. |
|
|
While programming, the | • A call is coming in. To answer the call, |
handset starts to ring and | press [C] or |
the program stops. | from the beginning after hanging up. |
|
|
You cannot redial. | • If the last number dialed was more than |
| 48 digits long, the number will not be |
| redialed correctly. |
|
|
You cannot make long | • Please make sure you have long |
distance calls. | distance service. |
|
|
You cannot page the | • The handset is too far from the base unit |
handset. | or is engaged in an outside call. Try |
| again later. |
34
