Panasonic AG-520F, AG-513F operating instructions TV Timer Features, ON-TIMER with Alarm

TV Timer Features

ON-TIMER with Alarm

This unit can be set to automatically power on in one of 2 modes (TV or Playback). Even if you set the On Timer, it will not be performed during Play Lock mode. You can also combine the On-Timer with a one minute alarm that gradually increases in volume.

Check List

The clock is set to the correct time.

1 Press PROG to display SET PROGRAM screen.

2		SET	PROGRAM
		T I MER PROGRAMMING
		ON TIMER
	SELECT :		SET :
	END : PROG

1)Press to select “ON TIMER.”

2)Press to display ON TIMER screen.

3			ON	T I MER
		6:--AM CH --
	ALARM		: ON
	SELECT :				SET :
	END : PROG

1)Press to select desired settings.

2)Press to set the ON-TIMER TIME or ON-TIMER mode.

• You can choose TV or PLAY for the On Timer mode. (If TUNER:OFF, you can only select PLAY.)

• Make sure a tape is inserted if Playback mode is selected.

					POWER	VOL	CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC INPUT
4		ON T I MER		Press	to select
				ALARM “ON” or “OFF.”
		6:00AM	CH08
	ALARM : ON
					CH		ON TIMER
	CANCEL : ADD / DLT						indicator
	SELECT :		SET :
	END	: PROG

When “ON” is selected, an alarm will gradually increase in volume for one minute or until canceled by pressing any button (including VOL + -).

To Make Corrections, use and to move back and correct.

Press PROG to set ON TIMER.
• “ON TIMER SET” is displayed.
5 • ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the
time in step 3. Now, press PROG to end.	Note
“ON TIMER END” briefly appears on-screen.

• If no button on the remote or unit

(including a button used to turn off the alarm) is pressed within 60 minutes after unit turns itself on, it will turn itself back off.

18