Panasonic AG-DVC60 Tcg, Free RUN, Rec Run, First, Rec Tc, CAM VCR Regen, TC Preset, UB Mode

Menu configuration (cont.)

RECORDING SETUP screen

Item/
(Display	Description of settings
mode)
TCG	Use this to set the mode in which to advance
(CAM) (VCR)	the time code.
	FREE RUN:
	The time code is advanced continuously
	regardless of the operation mode.
	It is recorded on the basis of the time
	appearing on the camera-recorder’s cal-
	endar clock.
	REC RUN:
	The time code is advanced only when
	recording is underway.
	It is recorded while ensuring that continu-
	ity is maintained with the time code
	already recorded on the tape when shoot-
	ing with frame-to-frame continuity.
FIRST	Use this to select the time code to be
REC TC	recorded when recording is started.
(CAM) (VCR)	REGEN:
	Select this to record the time code that will
	ensure continuity with the time code
	already on the tape.
	The time code is recorded in the REC
	RUN mode regardless of the setting
	selected for the TCG item.
	PRESET:
	Select this to record the time code using
	the value selected by the TC PRESET
	item as the initial value.
	However, when shooting with frame-tof-
	rame continuity has taken place, the time
	code is recorded to ensure continuity with
	the time code already on the tape.
TC PRESET	Use this to set the initial value of the time
(CAM) (VCR)	code to be recorded.
	The item takes effect when “PRESET” has
	been selected as the FIRST REC TC item
	setting.
1394 UB	Use this to select the user’s bit to be recorded
REGEN	when recording the signals of the unit con-
(VCR)	nected to the DV connector.
	OFF:
	The user’s bit selected by the UB MODE
	item is recorded.
	ON:
	The user’s bit of the signals input to the
	DV connector is recorded.
	• When “ON” has been selected as this
	item’s setting, it takes precedence over
	the UB MODE item setting.
	• If the signals do not contain the user’s bit
	information, the user’s bit is not recorded.
	• If no signals are input to the DV connector,
	the UB MODE item setting is used for the
	recording.

Item/
(Display	Description of settings
mode)
UB MODE	Use this to set what is to be recorded as the
(CAM) (VCR)	user’s bit.
	USER:
	The user’s information is recorded.
	TIME:
	The recording time is recorded.
	DATE:
	The recording date is recorded.
	TCG:
	The time code is recorded.
UB PRESET	Use this to set the user’s bit.
(CAM) (VCR)	For this, however, “USER” must have been
	selected as the UB MODE item setting.
EFFECT	Adds effects to the images.
(CAM)	OFF, WIPE, MIX
ONE-SHOT	Use the ON setting when shooting on a
REC	frame-by-frame basis.
(CAM)	OFF:
	Frame-by-frame shooting is not per-
	formed.
	ON:
	The camera-recorder is set to the
	frameby-frame shooting mode.
	When the START/STOP button is
	pressed, recording proceeds for the num-
	ber of seconds selected by the REC TIME
	item setting, and then the camera-
	recorder is set to the REC PAUSE mode.
REC TIME	Use this to set the recording time for frameby-
(CAM)	frame shooting.
	0.5s : 0.5 sec.	1s : 1.0 sec.
	1.5s : 1.5 sec.	2s : 2.0 sec.

The underlining indicates the factory setting.

70