Panasonic AG-DVC60 manual Other Functions screen

Menu configuration (cont.)

DISPLAY SETUP screen

Item/
(Display	Description of settings
mode)
LCD/EVF	Use this to adjust the display level of the
SET	images appearing in the viewfinder or on the
(CAM) (VCR)	LCD monitor.
	LCD BRIGHTNESS:
	Select this to adjust the brightness of the
	images on the LCD monitor.
	LCD COLOR LEVEL:
	Select this to adjust the color level of the
	images on the LCD monitor.
	EVF BRIGHTNESS:
	Select this to adjust the brightness of the
	images in the viewfinder.
SELF SHOOT	When MIRROR is selected, an image with
(CAM)	the left and right sides reversed will appear
	on the LCD monitor when shooting a selfpor-
	trait.
	NORMAL, MIRROR
EVF MODE	Use this to select to switch the screen
(CAM) (VCR)	images.
	ON:
	The images are always displayed in the
	viewfinder.
	AUTO:
	The images in the viewfinder are cleared
	when the LCD monitor is opened.
EVF COLOR	Select ON to display the images on the view-
(CAM) (VCR)	finder screen in color.
	OFF:
	The images are displayed in black and
	white.
	ON:
	The images are displayed in color.
EVF DETAIL	When ON is selected, the contours of the
(CAM) (VCR)	images in the viewfinder and on the LCD
	monitor are emphasized to make focusing
	easier.
	However, the images recorded will be normal
	images without emphasized contours.
	OFF, ON

OTHER FUNCTIONS screen

Item/
(Display	Description of settings
mode)
REMOTE	Use this to set the operations to be performed
(CAM) (VCR)	using the accessory remote control unit.
	(P19)
	VCR1:
	Operations performed using the remote
	control unit which has been set up for use
	with VCR1 are accepted.
	VCR2:
	Operations performed using the remote
	control unit which has been set up for use
	with VCR2 are accepted.
	OFF:
	No operations performed using a remote
	control unit are accepted.
DV	Use this to set the control method to be used
CONTROL	when a backup unit is connected to the DV
(CAM)	connector and backup recording is to be per-
	formed.
	OFF:
	The backup unit is not controlled.
	EXT:
	The backup unit is controlled using the
	camera-recorder’s START/STOP button.
	The images shot using the camera-
	recorder are recorded using the backup
	unit. (The camera-recorder does not per-
	form the recording operation.)
	BOTH:
	The images shot using the camera-
	recorder are recorded by both the camera-
	recorder and the backup unit.
	CHAIN:
	When the camera-recorder’s tape
	approaches its end during shooting,
	recording is automatically started by the
	backup unit that has been waiting in the
	recording standby mode.
DV	Use this to set the recording operation to be
CMD SEL	performed by the backup unit when the cam-
(CAM)	era-recorder’s START/STOP button is
	pressed.
	REC_P:
	The	START/STOP	button	switches
	between recording and rec pause.
	STOP:
	The	START/STOP	button	switches
	between recording and stop.
	<Note>
	If the backup unit does not have a rec pause
	function, select STOP.
REC LAMP	Select ON to light the tally lamp during shoot-
(CAM)	ing. (P77)
	OFF, ON

The underlining indicates the factory setting.

72