
RECORDING
Once you select a record format, all you need to do is press the red record
move the REC selector switch on the side of the handle from OFF to ON.
NOTE: If you do not select a record format, the camera will default to the last user’s record settings.
PLAYING CLIPS
To view clips on the camera, press the MODE but- ton (located to the left of the battery compartment) to switch from CAM (camera) to PB (playback).
All clips recorded on the card display in the LCD monitor. Use the operation lever to navigate to the clip to
DELETING CLIPS
After viewing your recorded footage, you can delete any clips you don’t want to use. While still in PB mode, press the MENU button. Scroll down and se- lect OPERATION in the PB menu. Select DELETE.
At this point, you can delete all unprotected clips on the card or selected clips only. If you delete ALL CLIPS, select YES when prompted by “ALL CLIPS DELETE?”.
If you delete SELECT clips, all recorded clips display on the LCD monitor. After pressing the EXECUTE
button, SELECT THE CLIP TO BE DELETED appears and all the clips display again. Select the clips to be deleted using the operation
safe!
Safety zone setup While you only shoot in 16:9 for HD, you can set up an overlay for your LCD monitor to ensure what you re- cord can be seen on a standard 4:3 TV.
In CAM mode, press the MENU button. Using the opera- tion lever, move to
DISPLAY SETUP (screen 2/3); pull the lever toward you to select.
Go to SAFETY ZONE next. The selections are 90%, 4:3, and
15