Specifications

VTR Section

VTR Video System (during playback on a standard playback unit)

Bands:

Brightness; 30 Hz to 5.75 MHzo1.0 dB/p3.0 dB

S/N ratio:

55 dB

K factor (2T pulse):

Within 2%

Y/C delay:

Within 30 ns

VTR Audio System (during playback on a standard playback unit)

Sampling frequency:

48 kHz (synchronized to video)

Quantization:

16-bits/sample

Frequency response:

20 Hz to 20 kHzt1.0 dB (at reference level)

Dynamic range:

80 dB or more (at 1 kHz, AWTD)

Distortion:

Within 0.1% (at 1 kHz, operating level)

Wow/flutter:

Below measurable limit

Head room:

20 dB

Emphasis:

T1r50 ¯s, T2r15 ¯s (can be turned ON/OFF)

VTR Tape Running System

Tape speed:

33.820 mm/s

Recording/playback time:

Approx. 66 min. (using the AJ-P66MP)

FF/REW time:

Approx. 3 min. (using the AJ-P66MP)

Connectors

 

Input

 

AUDIO IN CH1/CH2

 

(XLRX2, 3-pin, female):

MIC/LINE switchable, balanced, more than 10 kohm

 

MIC; Menu setting to p60/p50/p40 dBu

 

LINE; Menu setting to p6/0/o4 dBu

MIC IN (XLR, 3-pin, female):

Phantom o48 V, balanced, 3 kohm

 

Menu setting to p60/p50/p40 dBu

GENLOCK IN (BNC):

1.0 Vp-p, 75 ohm

Output

 

CAMERA OUT (BNC):

1.0 Vp-p, 75 ohm

VIDEO OUT (BNC):

1.0 Vp-p, 75 ohm

AUDIO OUT (CH1/CH2/MIX)

 

(XLR, 3-pin, male):

o4 dBu, balanced, low-impedance

 

(Menu setting to CH1/CH2/MIX)

PHONES (mini-jack·1):

 

Other

 

DC IN (XLR, 4-pin, male):

DC 11 to 17 V

DC OUT (4-pin):

DC 11 to 17 V, maximum rated current; 0.1 A

LENS (12-pin):

 

REMOTE (ECU, 6-pin):

 

Accessories

Microphone kit

Tripod attachment

Sony battery connector (screw included)

Weight and dimensions shown are approximate.

Specifications are subject to change without notice.

– 125 –

Page 125
Image 125
Panasonic AJ-D400 operating instructions VTR Section, Accessories