Panasonic AJ-D455 manual Changing the settings, Following message is displayed

Setup (default settings)

The unit’s major settings are performed by making selections on menus.

The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3 connector in the unit's connector area are hooked up. The menus can be output to the SDI OUT 3 connector as well when the AJ-YA455P component serial interface board is used.

Changing the settings

1

Press the MENU button.

The setup menu appears on the TV monitor and setup menu No. appears on the counter display. (If the setup has already been performed, the screen showing the changes made last will appear.)

2

3

Press the cursor buttons (, ) and select the item to be set.

The cursor (∗ ) on the menu screen moves and the item No. on the display flashes.

• When the button is pressed, the item No. is incremented for 001 → 002 → 003 → 004 → and so on; when the button is pressed, the item No. is decremented.

Press the cursor buttons (, ) at the position where the change is to be made. The menu screen and display setting No. now flashes.

When the button is pressed, the setting No. is incremented; when the button is pressed, it is decremented.

4

5

Repeat steps 2 and 3 to change other items.

Press the SET button.

The changes are now stored in the memory.

•To return the items to the settings established before the changes were made, press the MENU button without pressing the SET button.

To return the setup settings to the factory (initial) settings, press the RESET button while the menu is displayed.

The following message is displayed.

SETUP-MENU INIT SET

YES<PLAY>/NO<STOP>

When the PLAY button is pressed, the factory settings are restored.

1 5

<Notes>

•When the RESET button is pressed to return to the factory settings, the factory settings are restored only for the user file currently being used and other user files are not affected.

•The changed SYSTEM menu contents are stored in the memory even if the MENU button is pressed.

EJECT

ON POWER

OFF

CH CONDITION	CTL/TC/UB/
	REMAIN	REW STOP	FF	PLAY	REC
	RESET				DVCPRO
					DV

LEVEL
		SUPER	TC	MENU			SET
		ON	INT
	CH 1
		OFF	EXT	TC
	AUDIO			PRESET			DIAG
	REC LEVEL	AUDIO		FILE			PAGE
HEADPHONES		MONITOR
	CH 2	CH 1		DVCPRO/DV	Y PB PR	SDI	REMOTE
		MIX		SDI	CMPST	AES/EBU
		CH 2		ANALOG	S-VIDEO	ANALOG	LOCAL

VIDEO IN AUDIO IN

2, 3

15