Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional AJ-VF10.)

Mounting the Viewfinder

1 Press down the viewfinder.

2 Tighten the viewfinder stopper screw firmly. If it is difficult to insert the screw, press down the viewfinder once again.

3 Connect the plug to the viewfinder connector and secure the viewfinder cable with the clamp. Note{

Insert the plug firmly when connecting it to the viewfinder connector.

Stopper Screw

Detaching the Viewfinder

1 Check that the POWER switch is set to OFF.

2 Disconnect the plug from the viewfinder cable connector. Note{

Use both hands to detach the viewfinder. The viewfinder may not detach smoothly with one hand, resulting in damage to the viewfinder.

3 Loosen the viewfinder stopper screw and detach the viewfinder by pulling it straight up.

Pull straight up.

Stopper Screw

Hook your fingers here.

– 37 –