Setup Card Operations

Protecting stored data

If the setup card’s WRITE PROTECT switch is set to ON, data is not rewritten even if the UP button is pressed in step 7.

Set to ON.

When data is not written

If the following error messages appear when the UP button is pressed in step 7, the data is not written.

Data writing error messages

Error message

Condition

Countermeasure

 

 

 

NO CONFIG

The setup card is not

Format the card.

 

formatted.

 

 

 

 

NO CARD

A setup card is not

Insert a card.

 

inserted.

 

 

 

 

WRITE PROTECT

The write protect switch on

Set the write protect switch

 

the side of the card is set

on the side of the card to

 

to ON.

OFF.

 

 

 

ERROR

Data cannot be written on

The card may be

 

the card.

defective. Replace the

 

 

card.

 

 

 

– 91 –