Panasonic AJ-HDX400P Viewfinder screen display selection, Color temperature, Shutter, Speed/mode

Chapter 4 Adjustments and settings for recording

Display item	What is displayed			Status when display appears
H Color temperature	¢.¢K		This indicates the color temperatures assigned to the A, B, and PRE
			positions of the WHITE BAL switch. (These may be memory values
			during AWB operation or menu setting values.)			This indication does not
			appear in the ATW MODE.
I Shutter	11/¢¢.¢		This indicates that the shutter speed is set to SYNCHRO SCAN.
speed/mode	1/100 - 1/2000		This indicates that a fixed shutter speed has been set.
J D.ZOOM	DZ		This appears at the same time as the zoom ratio in the D.ZOOM mode.					4
	a2/a3/a4		When the FOCUS mode is selected, “a2” flashes but only for as long as
			this mode remains selected.
Viewfinder screen display selection
		Whether a display is		Displayed only by
		to be shown or not	Status displayed		Display can be		Displayed during
				MODE CHECK
		can be selected on a	when established		cleared		playback
				button (*1)
		menu.
1 Extender		≤	≤	µ	≤		–
2 MODE CHECK dedicated display area		–	–	≤	≤		–
3 Camera warning, message display area		–	≤	≤	≤		–
4 Information allocated to USER buttons		–	≤	≤	≤		–
5 Filter positions		≤	–	µ	≤		–
6 WHITE BAL switch position		≤	–	µ	≤		–
7 Cumulative gain display		≤	–	µ	≤		–
8 LINE MIX GAIN display		≤	–	µ	≤		–
9 Gain value		≤	–	µ	≤		–
: VTR warnings, information		≤	≤	µ	≤		–
; AUDIO input system and level meter		≤	–	All input information	≤		–
				for 2 channels
< Time code display		≤	–	µ	≤		≤(dependent upon menu)
= Iris override display		≤	≤	µ	≤		–
> Iris, f-value		≤	–	µ	≤		–
? Zoom display		≤	–	µ	≤		–
@ Interval, pre-rec display		–	≤	µ	≤		–
A ID recording display		–	≤	µ	–		–
B Battery type		–	–	µ	≤		–
C Remaining battery charge/voltage		≤	–	µ	≤		–
D Unit’s REC display		≤	≤	µ	≤		–
E Remaining tape		≤	–	µ	≤		–
F Total length of cassette tape		–	–	µ	≤		–
G Super iris ON/super black ON		≤	≤	µ	≤		–
H color temperature		≤	≤	µ	≤		–
I Shutter speed/mode		≤	≤	µ	≤		–
J D.ZOOM		–	≤	µ	≤		–

*1 ≤: The display does not appear when OFF has been selected for the STATUS item setting on the <MODE CHK IND> screen.

µ: Display always appears regardless of the menu.

43