Approximate Proxy Recording Time (optional) on SD memory cards

(Except for 24P native mode)

Card No.

MPEG4 recording rate

(Card Capacity)

192 kbps

768 kbps

1500 kbps

RP-SDH256

Approx.

Approx.

Approx.

(256 MB)

2 h 17 min

35 min

19 min

RP-SDH512

Approx.

Approx.

Approx.

RP-SDK512

4 h 27 min

69 min

38 min

(512 MB)

 

 

 

 

 

 

 

RP-SDQ01G

Approx.

Approx.

Approx.

RP-SDK01G

8 h 56 min

2 h 19 min

77 min

(1 GB)

 

 

 

 

 

 

 

RP-SDQ02G

Approx.

Approx.

Approx.

RP-SDK02G

18 h 11 min

4 h 44 min

2 h 37 min

(2 GB)

 

 

 

 

 

 

 

RP-SDV024G

Approx.

Approx.

Approx.

(SDHC 4 GB)

35 h 42 min

9 h 18 min

5 h 12 min

(Reference values when Panasonic bland SD memory cards or SDHC memory cards are used for continuous recording. Actual recording time depends on the kind of scenes and the number of clips.)

The values for 8 GB and 16 GB SDHC memory cards are double and four times the values for the 4 GB card.

For the latest information on P2 cards and SD memory cards not available in the operating instructions, visit the P2 Support Desk at the following Web site.

https://eww.pavc.panasonic.co.jp/pro-av/

Features of the Input/Output unit

Independent 3 system HD SDI output provided as standard configuration

HD SDI signals output from the HD SDI A · B connectors and MON OUT connector are independent to each other. HD SDI output includes embedded audio etc.

Dual Link compatible
Down converter output provided as a standard configuration

The MON OUT connector outputs down converter (analog composite) signals.

Also, output signal from the MON OUT connector can be switched between an HD SDI signal and a VBS signal.

The unit can be compatible to Dual Link using the HD SDI A connector and the HD SDI B connector. Link A will be output from the HD SDI A connector, and Link B from the HD SDI B connector.

Recording to the P2 card will be YPBPR 4:2:2 signal, and Dual Link signal format will be RGB 4:4:4.

Features USB 2.0 port (HOST/DEVICE)

By connecting with a PC via USB 2.0, a P2 card inserted in the unit can be used as a bulk storage device.

Also, since this unit has a USB HOST capability, it is possible to store P2 card data on an external hard disk connected using USB 2.0, to view clips stored on the hard disk and to write clips stored on the hard disk to the P2 card.

Remote control connector

By connecting the remote control unit (AJ-RC10G), which is available as an optional accessory, the unit can be controlled remotely. (Refer to page 123)

Confirmation of return video signals

It is possible to confirm the return video signals (analog

HD Y signals) supplied to the GENLOCK IN connector of the unit in the viewfinder to confirm programs.

Only video signals from the same record format can be confirmed. Note also that the 23.98PsF and 24PsF signals cannot be confirmed. (Refer to page 193)

DC OUT connector

The DC OUT connector of the unit produces 1.5 A of electrical current.

By connecting an external switch to this connector, it is possible to control recording start/stop.

Since a tally lamp can be used by connecting the LED to this connector, it is useful for shooting video when fixing the camera on a crane. (Refer to page 125)

Other features

Viewfinder connection

From the viewfinder connector of the unit, 1080/59.94i, 1080/50i signals are output.

Confirm images in multi formats by connecting the viewfinder (AJ-HVF21G), which is available as an optional accessory. (Refer to page 29)

User button

On the side panel of the unit, 5 user buttons (USER MAIN/ USER 1/USER 2/MARKER SELECT/TEXT MEMO) are available.

Each user button can be assigned the on/off function for any frequently used feature among the many features of the unit, such as SLOT SEL and Y GET. (Refer to page 59)

12

General: Features of the Input/Output unit