Panasonic AJ-HPX3700G, AJ-P2C064AG, AJ-YAX800G Handling data

Handling data

Set data file configuration

The unit employs 6 sets for the file data area.

FACTORY data:

The area for storing factory settings

Data cannot be revised with menu operations.

CINEMATOGRAPH data:

The area for storing cinematograph settings. Data cannot be revised with menu operations.

USER data:

The area for storing the data set by menu operations The FACTORY data is stored as the factory setting.

CURRENT data:

The area for storing the operating status of the unit

The set value in this area is revised by menu operations.

SCENE file:

16 sets of scene files are provided.

LENS file:

64 sets of lens files are provided.

For menu items that can be read from or stored in the respective areas, refer to [Menu] (page 166).

Notes

For information about how to navigate through the menu for this section, see [Setting Menu Options] (page 168). Access the respective data settings files after switching the PC MODE to “OFF”. If the respective data settings files are accessed when the unit is in USB DEVICE mode, an error may occur. The PC MODE can be operated from the <SYSTEM MODE> screen on the SYSTEM SETTING page.

Do not edit the data stored on the SD memory card using a PC or the like.

for Settings and Adjustments

				SD memory card		It is possible to write 8 setup files on
						the SD memory card.
				SET UP data
				No. of files: 8
Menu operations
To revise the set			SD CARD READ/WRITE		SD CARD READ/WRITE
			READ		WRITE
	value
							SCENE		SCENE file
							WRITE
									No. of files: 16
							SCENE
							READ
				CURRENT data
			(Operating status of the unit)
				No. of files: 1
							LENS FILE
WRITE USER		READ USER					READ
DATA		DATA		USER data						LENS file
				No. of files: 1			LENS FILE
							WRITE		No. of files: 64
	READ FACTORY
				FACTORY data
	DATA
				(Revision disable)
								LENS FILE CARD R/W			LENS FILE CARD R/W
				No. of files: 1
								READ			WRITE
	READ		CINEMATOGRAPH data
	CINEMATOGRAPH
				(Revision disable)
				No. of files: 1					SD memory card
										Lens file
		: Files built in the unit							No. of files: 8 8
								It is possible to write 8 titles for 8 lens files
		: Menu operations						on the SD memory card.

Setting Data Using an SD memory card

An SD memory card (optional) can be used as a setup card that stores up to 8 files of settings menu specifications. This data allows you to quickly reproduce an optimum state.

Regarding SD memory cards, please see <Cautions in using SD memory cards> (page 23).

Recording

Adjustments and Settings for Recording: Handling data 91