Setup (initial settings)
The unit’s main settings are performed while making selections using a
When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on the TV monitor.
|
|
|
|
|
|
|
|
|
| (2) (3) | |
POWER |
|
|
|
|
|
|
|
|
|
| EJECT |
ON |
|
|
|
|
|
|
|
|
|
|
|
OFF |
|
|
|
|
|
|
|
|
|
|
|
CONTROL | REC INHIBIT |
|
|
|
|
|
|
|
|
| |
LOCAL REMOTE | OFF | ON |
| Digital Video Cassette Recorder AJ- |
|
|
|
| |||
METER |
|
|
|
|
|
|
|
|
|
| PUSH |
FULL/FINE |
|
|
|
|
|
|
|
|
|
| SHTL/SLOW |
|
|
|
|
|
|
|
| SEARCH | PLAY | REC | |
|
|
|
|
|
|
|
|
|
| ||
MONITOR SEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| REW | STOP | FF |
HEADPHONES | CH 1 | CH 2 | CH 1 | CH 2 | UNITY | VAR | INPUT SELECT | COUNTER RESET | TC | INT | TCG SUPER |
|
|
|
|
| VIDEO AUDIO | PRESET | MENU | ON | |||
|
|
|
|
|
|
|
|
| REGEN | ||
|
|
|
|
|
|
|
|
|
| PRESET | OFF |
|
| REC |
| PB |
|
|
|
|
| EXT | |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| PF | PF1 PF2 | PF3 | DIAG |
| ||
Changing the settings
(1) Press the MENU button.
The setup menu screen appears on the TV monitor, and the setup menu item number appears on the counter display.
When the FF button is pressed for about 1.5 seconds, the name of the setup menu item is displayed on the counter display. When the same button is pressed again for about 1.5 seconds, the original item No. display is restored.
(If a setup was performed previously, the screen on which the last change was made is displayed.)
(2)Incline the joystick upward or downward to select the item to be set.
The cursor ( 
) on the menu screen moves, and the item number on the display flashes.
•When the FF or REW button is pressed while holding down the PLAY button, what is on the display is replaced with the next or previous major item.
(1)(5)
(4)If there is another item to be changed, repeat steps (2) to (3).
(5)Press the MENU button.
•If none of the settings have been changed, the menu screen display is cleared.
•If a setting has been changed, a confirmation screen appears.
•To activate the change in the setting, press the PLAY button.
•To cancel the change in the setting, press the STOP button.
•To return what has been established as the setting to the factory setting, press the RESET button while the menu is displayed. A confirmation screen now appears, and if the PLAY button is pressed in this status, the factory setting is restored.
(3)Incline the joystick to the left or right at the position where the change is to be made.
The setting is now changed.
To return what has been established as the setting to the factory setting, press the RESET button while holding down the SEARCH button.
Notes:
•If the RESET button is pressed to restore the factory settings, only the user files currently in use are restored. The other user files remain unaffected.
•The changes made to the SYSTEM menu contents are recorded also by pressing the MENU button to close the menu screen.
17