Time code/user bit (continued)
Timecodes recorded by this product
| Setup menu | Setup menu | Selected video input | Recorded timecode |
| ||
TCG switch | No. 505 | No. 514 | signal |
|
|
| |
|
|
| |||||
| EXT TC SEL | VITC GEN | SBC area | VAUX area |
| ||
|
|
| |||||
|
|
|
|
|
|
| |
|
|
| 1394 |
| Timecode on IEEE1394 |
| |
INT |
|
|
| digital input (VAUX area) |
| ||
| OFF |
| Internal TCG value |
| |||
(REGEN/ | – – – | Y PB | VITC on input video signal | 3 | |||
|
| ||||||
PRESET) |
|
| CMPST/SDI |
| |||
|
|
|
|
| |||
|
| ON | – – – | Internal TCG value |
| ||
|
|
| 1394 | Timecode from TIME CODE | Timecode on IEEE1394 |
| |
|
|
| digital input (VAUX area) |
| |||
|
| OFF |
|
| |||
| LTC | Y PB | IN connector input 1 | VITC on input video signal | 3 | ||
|
| ||||||
|
|
| CMPST/SDI |
| |||
|
|
|
|
|
| ||
|
| ON | – – – | Timecode from TIME CODE IN connector input 1 |
| ||
|
|
| 1394 | Timecode on IEEE1394 | Timecode on IEEE1394 |
| |
EXT |
|
| digital input (SBC area) | digital input (VAUX area) |
| ||
| OFF |
|
| ||||
|
| Y PB | VITC on input video signal 2 | VITC on input video signal | 3 | ||
|
|
| |||||
| VITC |
| CMPST/SDI | ||||
|
|
|
|
| |||
|
| 1394 | Timecode on IEEE1394 digital input (SBC area) |
| |||
|
|
|
| ||||
|
| ON |
|
|
|
| |
|
| Y PB | VITC on input video signal 2 |
| |||
|
|
|
| ||||
|
|
| CMPST/SDI |
| |||
|
|
|
|
|
| ||
1: The internal TCG value is used when the signal cannot be detected from the TIME CODE IN connector input. |
| ||||||
2: The internal TCG value is used when the VITC cannot be detected on the input video signal. |
|
| |||||
3: Nothing is recorded if the VITC cannot be detected on the input video signal. |
|
| |||||
Superimpose screen
The control signals, time code, etc. are displayed using abbreviations.
TV monitor
Characters displayed
The background of characters superimposed on the display can be changed using setup menu No. 011 (CHARA TYPE).
TCR | : : : | : : : |
| : : : |
| TCR | TCR |
Abbreviations:
CTL : Control signal count value
TCR : Time code data recorded in the SBC area
TCR. : Time code data recorded in the VAUX area
UBR : User bit data recorded in the SBC area
UBR.: User bit data recorded in the VAUX area
TCG : Time code data of the time code generator
UBG : User bit data of the time code generator
Note:
[T 
R], [T 
R.], [U 
R] or [U 
R.] is displayed when the data has not been read correctly from the tape.
TV monitor | TV monitor |
Display position
The position of the characters superimposed on the display can be changed using setup menus No. 009 (CHARA H- POS) and No. 010 (CHARA
TCR 
: 
: 
: 
TCR 
: 
: 
: 
TV monitor | TV monitor |
Operation mode
The VTR’s operation mode can also be displayed using setup menu No. 008 (DISPLAY SEL).
TCR | : : : |
| VTR operation mode |
STOP |
|
| |
|
| ||
|
|
|
|
TV monitor
36