Joystick
(1)Press the SEARCH button to activate the joystick.
When STICK has been selected as the setup menu item No.100 (SEARCH ENA) setting, the joystick will be activated without pressing the SEARCH button.
•If the SEARCH button is pressed while the joystick is pressed to one side, the current speed is maintained even if the joystick is released. Pressing the STOP, PLAY, or other operation buttons cancels the fixed speed operation.
(2) Press the joystick to switch between the SHTL |
|
|
|
|
|
|
|
| (2) | |
mode and SLOW mode. |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
(3) When the joystick is inclined toward the right, |
|
|
|
|
|
|
|
|
| EJECT |
the tape can be played back in the forward | POWER |
|
|
|
|
|
|
|
| |
ON |
|
|
|
|
|
|
|
|
| |
direction at a variable speed based on the angle | OFF |
|
|
|
|
|
|
|
|
|
CONTROL | REC INHIBIT |
|
|
|
|
|
|
| ||
that the stick is inclined. When the stick is | LOCAL REMOTE | OFF | ON |
| Digital Video Cassette Recorder AJ- |
|
|
| ||
inclined toward the left, the tape is played back | METER |
|
|
|
|
|
|
|
| PUSH |
FULL/FINE |
|
|
|
|
|
| SEARCH |
| SHTL/SLOW | |
|
|
|
|
|
|
|
|
| PLAY | REC |
in the reverse direction. | MONITOR SEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| REW | STOP | FF | |
• SHTL mode: |
|
|
|
|
|
|
|
|
|
|
The maximum speed which is established when the | HEADPHONES | CH 1 | CH 2 | CH 1 | CH 2 |
| INPUT SELECT | TC | INT | TCG SUPER |
|
|
|
|
| UNITY VAR |
| COUNTER RESET PRESET | EXT | OFF | |
|
|
|
|
|
|
| VIDEO AUDIO |
| REGEN | ON |
|
|
|
|
|
|
|
|
| PRESET |
|
joystick has been inclined at the maximum angle |
|
| REC | PB |
|
| PF | PF1 PF2 PF3 | DIAG |
|
|
|
|
|
|
|
|
|
|
| |
corresponds to the speed which has been set by setup |
|
|
|
|
|
|
| (1) |
| |
menu item No.101 (SHTL MAX). |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
•SLOW mode:
The speed ranges from |
|
| (4) | |
(4) When the joystick is inclined upward, the tape |
|
|
| |
travels in | tte Recorder AJ- | (3) | (3) | |
direction; when it is inclined downward, it | ||||
|
|
| ||
travels in |
|
| SHTL/SLOW | |
|
|
| PUSH | |
direction. |
| SEARCH PLAY | REC(4) | |
Slow playback is performed if the stick is held |
|
|
| |
at the top or bottom position. |
|
|
|
PF (Programmable Function)
Three setup menu items can be registered in the PF buttons, and these buttons can then be used to change the setup menu settings by a simple operating procedure.
Registering the items in the PF buttons
(1)Press the MENU button, and open the setup menu.
(2)Incline the joystick upward or downward to select the PF number item
MENU |
| ||
<USER1> | NO . A 0 4 - | ||
A 0 2 | P. ON LOAD | OFF | |
A 0 4 | PF1 ASSIGN | 513 | |
A 0 5 | PF2 ASSIGN | 722 | |
A 0 6 | PF3 ASSIGN | ||
END
(3) When the joystick is pressed, a list of items which can be set is displayed.
| ||
<USER1> | NO . A 0 4 - | - - - |
A04 PF1 ASSIGN | ||
---N O A S S I G N
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
008 DISPLAY SEL
009 CHARA
010 CHARA
(4)Incline the joystick upward or downward to select the item.
(5)When the joystick is pressed, the regular menu display screen is restored.
When the MENU button is pressed, a confirmation screen appears. Press the PLAY button to set.
Performing operations using the PF buttons
(1)When the PF button is pressed, the registered items are displayed on the monitor screen which is output from the VIDEO MON connector.
PF1: INT SG | CB75 |
PF2: REC CH1 | CH1 |
PF3: |
(2)Press the PF1, PF2 or PF3 button that corresponds to the item whose setting is to be changed. Each time the button is pressed, the setting is updated in sequence.
(3)When the PF button is pressed again, the regular display is restored. If no operations are made, the display is also restored automatically after five seconds elapse.
15