Setup menus (continued)

USER menu <VIDEO>

No./Item

 

Description

 

 

624

For selecting whether to record the

CC REC

closed caption signals multiplexed on

the input signals on the tape.

(For AJ-SD255P)

 

 

 

0000

OFF :

 

No closed caption signal is recorded.

 

0001

ON :

 

When a closed caption signal is

 

detected from the selected input

 

signal, it can be recorded.

 

Note:

 

 

If 1394 signals have been selected as the

 

input signals using the INPUT SELECT

 

button, the closed caption signals which

 

have been multiplexed onto the input

 

signals will be recorded on the tape

 

regardless of the setting.

 

 

645

This selects whether or not to record the

WIDE

wide-screen information on the tape.

 

 

SELECT

0001

WIDE :

 

The wide-screen information is

 

recorded on the tape.

 

0002

NORMAL :

 

The wide-screen information is not

 

recorded on the tape.

 

Notes:

 

• If 1394 has been selected as the input

 

signals using the INPUT SELECT

 

button, the wide-screen information on

 

the input signals will be recorded

 

regardless of this menu’s setting.

 

• With input signals other than 1394

 

signals, the wide signals will not be

 

detected. Select WIDE as the setting

 

when recording the wide-screen

 

information on the tape.

 

• Regardless of the above setting, the

 

wide-screen information cannot be

 

superimposed onto tape playback and

 

output.

 

 

660

This selects whether or not to record

UMID REC

the UMID information on the tape.

 

 

 

0000

OFF :

 

UMID information is not recorded on

 

the tape.

 

0001

ON :

 

UMID information is recorded on the

 

tape.

 

Note:

 

 

If 1394 has been selected as the input

 

signals using the INPUT SELECT button,

 

UMID will not be recorded even when it is

 

set to ON unless the input signal can be

 

detected.

 

 

 

The underlined items indicates the initial setting.

YA94G This appears only when the optional board AJ-YA94G has been installed.

YAD255G This appears only when the optional board AJ-YAD255G has been installed.

No./ItemDescription

661This selects the basic UMID information to be recorded on the tape

UMID GEN

when ON has been selected as the

 

setup menu item No. 660 (UMID REC)

 

setting.

 

 

 

0000

INT :

 

 

 

Newly created basic UMID information

 

of this unit is always recorded.

 

0001

EXT :

 

 

 

The basic UMID information of the

 

input signals is recorded.

 

 

Newly created basic UMID information

 

of this unit is recorded if there is no

 

basic UMID information on the input

 

signals.

 

 

 

Note:

 

 

 

 

The source pack (of the UMID

YA94G

information) of the input signal will be

recorded on the tape, regardless of this

YAD255G

menu’s setting.

 

 

 

 

662

This sets the line on which the UMID

UMID POS

information is to be superimposed.

 

 

 

 

 

(For AJ-SD255P)

(For AJ-SD255E)

 

0000 BLANK

0000 BLANK

 

0001

12L

0001

8L

 

:

:

:

:

 

0006

17L

0010

17L

 

:

:

:

:

 

0008

19L

0015

22L

 

Notes:

 

 

 

 

• The line selected for the setup menu

 

item No. 501 (VITC POS-1) and No. 502

 

(VITC POS-2) settings cannot be

 

selected for this item.

 

 

• The default settings are not restored

YA94G

even if the RESET button is pressed

while holding down the SEARCH button.

29