Setup menus (continued)
USER menu <TAPE PROTECT>
No./Item |
| Description |
|
| |
400 | This menu item is for selecting the | |
STILL TIMER | time to elapse before the tape | |
protection mode is established when a | ||
| DVCPRO tape is used. | |
| It is also for selecting the time to elapse | |
| before the tape protection mode is | |
| established when the VTR has been left | |
| standing in the STOP or search STILL | |
| (JOG, SLOW or SHTL) mode. | |
| (Unit: s = second, min = minute) | |
| 0000 | 0.5s |
| 0001 | 5s |
| 0002 | 10s |
| 0003 | 20s |
| 0004 | 30s |
| 0005 | 40s |
| 0006 | 50s |
| 0007 | 1min |
| 0008 | 2min |
| Notes: | |
| • STEP FWD and HALF LOADING are | |
| provided in the tape protection mode. | |
| Either of these can be set for STOP and | |
| SEARCH STILL. | |
| • The cumulative standby time at the | |
| same tape position increases when | |
| transmitting programs or otherwise | |
| using identical materials repeatedly. In | |
| order to protect the tape, it is | |
| recommended that the shortest possible | |
| setting for the standby time in the same | |
| tape location is used. | |
|
| |
401 | When the time selected as the setup | |
| menu item No. 400 (STILL TIMER) | |
SRC | setting elapses while the unit is in the | |
PROTECT | search STILL (JOG/SLOW/SHTL) | |
| mode, the unit automatically enters | |
| one of the tape protection modes. This | |
| menu item is for selecting which tape | |
| protection mode the unit is to enter. | |
| 0000 | STEP : STEP FWD |
| 0001 | HALF : HALF LOADING |
| Note: |
|
| When STEP FWD is selected, the unit | |
| automatically goes into the STANDBY | |
| OFF (HALF LOADING) mode when the | |
| total time for which the unit is left standing | |
| in the still status reaches 30 minutes (or 1 | |
| minute for a DV/DVCAM tape). | |
|
| |
402 | This selects the drum operation in the | |
DRUM | STANDBY OFF (HALF LOADING) | |
mode. | ||
STDBY |
|
|
| 0000 | OFF : |
| The drum stops rotating. | |
| 0001 | ON : |
| The drum continues rotating. | |
|
|
|
The underlined items indicates the initial setting.
No./Item |
| Description |
|
| |
403 | When the time selected as the setup | |
STOP | menu item No. 400 (STILL TIMER) | |
setting elapses while the unit is in the | ||
PROTECT | STOP mode, the unit automatically | |
| enters one of the tape | |
| protection modes. This menu item is | |
| for selecting which tape protection | |
| mode the unit is to enter. | |
| 0000 STEP : STEP FWD | |
| 0001 HALF : HALF LOADING | |
| Note: |
|
| When STEP FWD is selected, the unit is | |
| automatically transferred to the | |
| STANDBY OFF (HALF LOADING) mode | |
| when the total time during which it has | |
| been left standing in the STOP mode | |
| reaches 30 minutes (or 1 minute for a | |
| DV/DVCAM tape). | |
|
| |
404 | This menu item is for selecting the | |
| time to elapse before the tape | |
DV STILL TMR | protection mode is established when a | |
| DV or DVCAM tape is being used. | |
| It is for selecting the time to elapse before | |
| the tape protection mode is established | |
| when the VTR has been left standing in | |
| the STOP or search STILL (JOG, SLOW | |
| or SHTL) mode. | |
| (Unit: s = second, min = minute) | |
| 0000 | 0.5s |
| 0001 | 5s |
| 0002 | 10s |
| 0003 | 20s |
| Note: |
|
| When using the unit in temperatures | |
| below 59°F (15 °C), set this item to 10 | |
| seconds to protect the tape and video | |
| heads. |
|
|
|
|
25
