Panasonic AJ-SD255P manual User menu Video

Setup menus (continued)

USER menu <VIDEO>

No./Item		Description
600	This selects the internal reference
INT SG	signal.
	0001	BB :
	The black burst is generated.
	0002	CB100 :
	100% color bars are generated.
	0003	CB75 :
	75% color bars are generated.

602This selects whether to mute the video output signals when a blank on the

V-MUTE	tape has been detected during
SEL	playback.
	0000	N-MUTE :No muting. (Freeze)
	0001	LOW RF :Muting. (Set to gray.)
603	This selects ON or OFF for the closed
CC (F1)	caption signal of the first field.
BLANK	0000	BLANK : Signal is forcibly blanked.
(For AJ-SD255P)	0001	THRU :Signal is not blanked.
604	This selects ON or OFF for the closed
CC (F2)	caption signal of the second field.
BLANK	0000	BLANK : Signal is forcibly blanked.
(For AJ-SD255P)	0001	THRU :Signal is not blanked.
605	This selects the freeze mode for still
FREEZE SEL	pictures.
	0000	FIELD : Field freeze.
	0001	FRAME : Frame freeze.
	Note:
	When frame freeze has been selected,
	the frame slow status is established with
	the slow setting.
609	This selects whether to superimpose
EDH	EDH onto the SDI output signals.
YA94G	0000	OFF : EDH is not superimposed.
	0001	ON : EDH is superimposed.
610	This selects the analog component
PB/PR IN LV	input level.
(For AJ-SD255P)	0000	M	:	M	level
	0001	B-CAM :ß-CAM level
614	This selects the analog component
PB/PR OUT	output level.
LV	0000	M	:	M	level
(For AJ-SD255P)	0001	B-CAM :ß-CAM level

No./Item		Description
622	For setting 7.5% setup processing to
SETUP	be performed on input and output
	signals.
(For AJ-SD255P)	When the STOP button is pressed,
	operation is transferred to the sub-screen,
	and the setup level is set for each output.
	To return from the sub-screen, press the
	STOP button again.
Sub-screen
00	This selects the 7.5% setup processing for
CMPST IN	the input composite and S-Video signal.
	0000	THRU :
	The signal is recorded in its original
	form.
	0001	CUT :
	The signal is recorded with the 7.5%
	setup removed.
01	This selects the 7.5% setup processing for
	the input composite and S-Video signal.
CMPST OUT
	0000	THRU :
	The signal is output in its original form.
	0001	ADD :
	The signal is output with the 7.5%
	setup added.
	Note:
	Bear in mind the setting for sub-screen
	item No. 03 (CMPNT OUT) of setup
	menu item No. 622 (SETUP).
02	This selects the 7.5% setup processing
CMPNT IN	for the input component signal.
	0000	THRU :
	The signal is recorded in its original
	form.
	0001	CUT :
	The signal is recorded with the 7.5%
	setup removed.
03	This	selects the 7.5% setup
	processing for the output composite,
CMPNT OUT	component and serial (digital) signal.
	0000	THRU :
	The signal is output in its original form.
	0001	CUT :
	The signal is output with the 7.5%
	setup removed.
	0002	ADD :
	The signal is output with the 7.5%
	setup added.

The underlined items indicates the initial setting.

YA94G This appears only when the optional board AJ-YA94G has been installed.

28